DLT and Marpa 1.1

Discussion in 'Multi-Room Audio (MRA) and MARPA' started by desd, Apr 6, 2006.

  1. desd

    desd

    Joined:
    Jul 7, 2005
    Messages:
    42
    Likes Received:
    0
    Location:
    NZ
    Referring to the MRA example in the MRAS Installation Instructions and specifically to the DLT configuration (Fig 29) how will the DLT switch update its screen dynamically with the "source_next" GA key set as "bell press" and the 2 "dynamic" keys set as "on/off".

    I would have thought to dynamically change the labels, one would have required a scene with a trigger group and action selector ...



    Des
     
    desd, Apr 6, 2006
    #1
  2. desd

    desd

    Joined:
    Jul 7, 2005
    Messages:
    42
    Likes Received:
    0
    Location:
    NZ
    well it does work, as long as you enable dlt labelling on the following:

    "more"tab on cbus setting for amps
    "Zones" - select the appropriate zone used with DLt- in Marpa
    "Global" tab in toolkit
     
    desd, Apr 6, 2006
    #2
  3. desd

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    As you have found out the amplifiers and matrix switcher handle all the magic for you. :)
     
    Richo, Apr 6, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. MARPA V1.0 Released

  2. MARPA V1.0 Released How about the hardware ??

  3. MARPA V1.1 Released

  4. Marpa Help

  5. **IMPORTANT NOTICE ** Marpa 1.1 has problem with non-default transmit count values.

  6. MARPA and Vista

  7. DLT controlling volume from one button (was: DLT And Infra Red Codes)

  8. Marpa box and streaming

Loading...