Display objects and variables on visualisation

Discussion in 'C-Bus Automation Controllers' started by Memphix, Dec 6, 2022.

  1. Memphix

    Memphix

    Joined:
    Aug 31, 2006
    Messages:
    248
    Likes Received:
    1
    Location:
    Australia
    I might be caught in the PICED world, but looking to see how I could create a user adjustable setpoint and similar. I can't see quickly/easily how to add a group address level with a multiplier.
    For example, lux levels in PICED is address level x 10. How could that be displayed within the visualisation on the automation controllers?
    How could a variable be displayed too? Like displaying a system IO in PICED.
    How could you the user adjust that variable? Like nudging a value in PICED.

    Some guidance would be amazing. Hopefully all is possible without extreme coding.
     
    Memphix, Dec 6, 2022
    #1
  2. Memphix

    Ks04

    Joined:
    Dec 28, 2019
    Messages:
    107
    Likes Received:
    9
    I do this via an 'unsigned integer' type on the 'user parameter' application - from there you can set the visualisation parameters to have a step and min/max. I then use some logic to use this to send to the value to the aircon via api.

    Hope that helps directionally
     
    Ks04, Dec 19, 2022
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Interface for Using Custom Objects?

  2. C-Touch System Variables and Memory Type

  3. Possible bugs - GetUnitParameter & Unit Parameter objects on a SHAC 1.07

  4. Hide Visualisation Structure Menu to User

  5. 5500SHAC - early thoughts, and how to make the visualisation less fugly?

  6. Why would one of my devices not show in 5500SHAC Objects

  7. Visualisation time and date Question

  8. Visualisation stops under certain circumstances

Loading...