Dis dimming help

Discussion in 'General Discussion' started by Nigel, Jul 9, 2022.

  1. Nigel

    Nigel

    Joined:
    Jul 9, 2022
    Messages:
    2
    Likes Received:
    0
    Hello I am changing over existing 600x600 lights to led panels using a dimmable driver as existing lights are dimmable, unfortunately the existing pit sensor is dis and new driver does not work on dis only Dali and 0-10v. Is it possible to convert dis signal to Dali as a cheap option? Any help very much appreciated
     
    Nigel, Jul 9, 2022
    #1
  2. Nigel

    Nigel

    Joined:
    Jul 9, 2022
    Messages:
    2
    Likes Received:
    0
    Should of read first sorry mention - DSI and PIR
     
    Nigel, Jul 9, 2022
    #2
  3. Nigel

    Pc2022

    Joined:
    Aug 3, 2022
    Messages:
    17
    Likes Received:
    1
    Short answer is no.

    Are they dali only drivers
    or universal dali/dsi

    If Dali only you will not be able to switch or control them with out a dali line (power supply and gateway)
    also each light will have to be addressed and assigned a group unless you plan on switching them all on/off together.

    other option is to switch the circuits with a relay on/off as a temp option
     
    Pc2022, Aug 3, 2022
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lost Dimming

  2. Dimming iron core transformers

  3. Dimming Linear 240V Double Ended Halogen Lamps

  4. disco dimming

  5. Dimming of LED lights

  6. Basic Hydronic setting dis-allows timer programing??

  7. LED lighting dimming & non-dimming.

  8. Multi sensor dimming programming help

Loading...