Dimmable G9 LED

Discussion in 'C-Bus Wired Hardware' started by Mike Costello, Sep 28, 2017.

  1. Mike Costello

    Mike Costello

    Joined:
    Dec 9, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    UK
    Hi,

    Has anyone used a G9 dimmable LED that works well with an 8 channel dimmer L5508D1A

    Thanks
    Mike
     
    Mike Costello, Sep 28, 2017
    #1
  2. Mike Costello

    DarylMc

    Joined:
    Mar 24, 2006
    Messages:
    1,308
    Likes Received:
    49
    Location:
    Cleveland, QLD, Australia
    I don't know what is available in the UK but I think it is unlikely you will find a suitable LED for dimming with flawless results.
    In any case your dimmer is leading edge type and you should look for products which say they are suitable for leading edge dimmers.
    The number of lamps per channel changes things.
    Will the lamps glow in the off state is also something to consider.

    If not turning off is the only issue you run into you can buy a Clipsal 31LCDA device.
    But then I think you need to start looking at the cost effectiveness compared to a new light fitting which might be more suitable or just keeping the incandescent bulbs.
     
    DarylMc, Sep 29, 2017
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.