Delay control via cbus

Discussion in 'C-Bus Wired Hardware' started by spikestar, Jul 27, 2017.

  1. spikestar

    spikestar

    Joined:
    Jul 27, 2017
    Messages:
    2
    Likes Received:
    0
    Location:
    Melbourne
    hi guys i have multiple relay modules which have lights connected to them.

    I'm interested to know how can i make lights turn on one after another with a 2sec dealy in between them? The lights are LEDs and just turn on or off through a contactor.

    Also each light currently can be turned on after 2 AND conditions are met. Is it possible for the light to turn on after 3 conditions are true without writing logic.

    For example input 1 and input 2 and input 3?
     
    spikestar, Jul 27, 2017
    #1
  2. spikestar

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    If you set a different turn on thresholds for each light in the relay, give them all the same group address, then ramp that address, each light will turn on as the ramp goes through the turn on threshold.
     
    Ashley, Jul 27, 2017
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Timer delay off (Now that's a newbie question)

  2. Velux window motor control via cbus

  3. Stagger Delay Times

  4. Serial C&M via Ctouch via 5500PC

  5. Lexcom home IR control delay

  6. 5031NIR Inter-key Delay and Inter-Device Delay

  7. CBUS control via C-bus PCI

  8. AC On/Off Control Via CBus

Loading...