Decouple DLT button press and button LED into different groups?

Discussion in 'C-Bus Wired Hardware' started by poldim, Aug 28, 2019.

  1. poldim

    poldim

    Joined:
    Dec 7, 2010
    Messages:
    166
    Likes Received:
    2
    Location:
    San Francisco, CA
    I want the button press to control one group, while another group will set the state of the LED.

    Is this possible to do?
     
    poldim, Aug 28, 2019
    #1
  2. poldim

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    No, this is not possible.
     
    Ashley, Aug 28, 2019
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Same key input, switching different groups?

  2. DLT controlling volume from one button (was: DLT And Infra Red Codes)

  3. Different sounds for different alarms

  4. Can you program the PIR to operate different lighting at different times of the day

  5. Different Light Levels at different times of the day

  6. eDLT and Short Press Toggle with Long Press Start Timer

  7. EDLT 1 button bell press with 2 groups

Loading...