DALI SCI rs232 software windim /dalitool

Discussion in 'DALI Software' started by theduke, Feb 23, 2023.

  1. theduke

    theduke

    Joined:
    Jun 15, 2007
    Messages:
    10
    Likes Received:
    0
    Hi All,

    I know that this is a cbus forum, but help me out please.

    I am about to attend a 15 year old cbus dali system to a basic check on the system. (turns out I did the original install:)
    I have not done much with DALI in the last few years so I only have a Tridonic DALI SCI RS232.
    And after multiple laptops, I do not have software for it.
    This is all short notice so I don't have time to wait for new hardware to come in for this first visit.

    Can anybody help me with compatible software for the Tridonic Dali SCI rs232 like windim or dalitool.
    I have tried to google, but no luck.

    Thank heaps!

    Roeland
     
    theduke, Feb 23, 2023
    #1
  2. theduke

    KCW

    Joined:
    Apr 6, 2007
    Messages:
    25
    Likes Received:
    0
    Location:
    Hong Kong
    KCW, Feb 23, 2023
    #2
  3. theduke

    theduke

    Joined:
    Jun 15, 2007
    Messages:
    10
    Likes Received:
    0
    Thank you,

    But as per the website, masterconfigurator does not support the Dali sci over rs232 that I have.
    This is why I’m looking for the old old old software
     
    theduke, Feb 23, 2023
    #3
  4. theduke

    KCW

    Joined:
    Apr 6, 2007
    Messages:
    25
    Likes Received:
    0
    Location:
    Hong Kong
    KCW, Feb 23, 2023
    #4
  5. theduke

    theduke

    Joined:
    Jun 15, 2007
    Messages:
    10
    Likes Received:
    0
    :) thank you, but no luck.
     
    theduke, Feb 24, 2023
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.