DALI on same network / Primary App

Discussion in 'C-Bus Wired Hardware' started by Novice2009, Jul 18, 2009.

  1. Novice2009

    Novice2009

    Joined:
    Jul 5, 2009
    Messages:
    8
    Likes Received:
    0
    Location:
    uk
    I have a mix of lights within the same room, some are DALI fitting some are standard ballasts or fittings controlled by relay. I also have two DLT switches to control the lighting (see other post) and want to control the DALI lights from the same switch or scene as the other lights so I need them to be set on the same network as opposed to a seperate DALI network configured as a Secondary application on the saturn DLT switch.

    Any thoughts?
     
    Novice2009, Jul 18, 2009
    #1
  2. Novice2009

    filpee

    Joined:
    May 31, 2006
    Messages:
    204
    Likes Received:
    0
    Location:
    Western Australia
    Dali doesnt need to run on its own application. Just change the Dali primary application to Lighting.
     
    filpee, Jul 19, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CNI and PC interface on the same network

  2. Will HomeGate & Toolkit co-exist on same machine

  3. Integration 3 C-bus network and 8 Dali network Problem

  4. DALI Network

  5. How to add DALI application to network

  6. Lights on nobody home (Wiser UI not operating and iPhone app shows red network light)

  7. 1 C-Bus Network & Multiple DALI Networks

  8. iPad App now on App Store

Loading...