Dali groups to represent as lighting groups

Discussion in 'DALI Software' started by SeanA, May 10, 2022.

  1. SeanA

    SeanA

    Joined:
    Jul 3, 2017
    Messages:
    5
    Likes Received:
    0
    Location:
    Australia
    Im very new to the Dali side of Cbus. I have an automation controller that requires lighting groups only for integration. I currently have all my ballasts addressed and working well with cbus edlt, scenes etc. However, is there a way I can tie the Dali group to the Lighting groups?

    EDIT: found answer .

    Set primary application in Dali gateway to lighting. This brings in all Dali groups mapped to lighting groups.
     
    Last edited: May 10, 2022
    SeanA, May 10, 2022
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Best way to operate 82 lighting groups from one button

  2. Lighting Groups

  3. DALI Emergency Lighting Test on CBUS

  4. Syncing Thermostats/HVAC to and from Lighting Groups.....PAC Logic

  5. Not all Dali lights turn on every time with cbus but do with dali programmer

  6. Not all Dali lights turn on every time with cbus but do with dali programmer

  7. Lighting and Dali scene.

  8. Potential LED Dimming solution. Dali Gateway>Dali input LED Power Supply?

Loading...