DALI Gateway Dimming Issues

Discussion in 'DALI Software' started by remedy, Feb 11, 2013.

  1. remedy

    remedy

    Joined:
    Nov 22, 2008
    Messages:
    16
    Likes Received:
    0
    Hi

    I have a CBUS network comprising of 4 DALI Gateways, A CBUS Power supply 3 Light Level Sensors and a PAC.

    I am trying to send a broadcast level to the DALI fittings but they are setting them at random levels.

    I have used DALI software to address the fittings and send broadcast levels and everything is perfect. However try to send the broadcast command on CBUS and you get different levels.

    I have used these fittings before with CBUS and didnt have this problem.

    HELP!!!!!

    :confused:
     
    remedy, Feb 11, 2013
    #1
    1. Advertisements

  2. remedy

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,367
    Likes Received:
    13
    Location:
    Adelaide, South Australia
    Sounds like time to use your DALI commissioning s/w to monitor whats happening on the DALI side.

    It sounds like a configuration fault in the C-Bus -> DALI gateway, but you have not posted your settings for that so its hard to tell.
     
    ashleigh, Feb 11, 2013
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.