DALI 5502DAL "Type 8" Control

Discussion in 'C-Bus Wired Hardware' started by Timbo, Sep 12, 2018.

  1. Timbo

    Timbo

    Joined:
    Aug 3, 2004
    Messages:
    22
    Likes Received:
    4
    Location:
    Perth, Australia
    Hi All,

    Wanted to know if the C-Bus 5502DAL gateway was able to drive tunable white drivers,ie DALI TYPE 8 devices which allow multiple channels for one address.

    Cheers,

    Tim
     
    Timbo, Sep 12, 2018
    #1
  2. Timbo

    jboer

    Joined:
    Apr 27, 2012
    Messages:
    458
    Likes Received:
    35
    Location:
    Sydney
    Unfortunately not directly, with some Erco drivers I used I had to get a firmware file from Germany to be able to set them into a mode where each of the colour channels were exposed as a separate DALI fixture to get around this issue.
     
    jboer, Sep 12, 2018
    #2
    Mr Mark and Timbo like this.
  3. Timbo

    Timbo

    Joined:
    Aug 3, 2004
    Messages:
    22
    Likes Received:
    4
    Location:
    Perth, Australia
    Hi,

    Thought that was the case, bit annoying as this means I'll have to use a couple of drivers.

    Thanks for the prompt reply!

    Tim
     
    Timbo, Sep 13, 2018
    #3
  4. Timbo

    Timbo

    Joined:
    Aug 3, 2004
    Messages:
    22
    Likes Received:
    4
    Location:
    Perth, Australia
    Ooh just saw how long I've been a forum member, with only 1 message!!
    Talk about being a forum lurker :)
     
    Timbo, Sep 13, 2018
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.