Current sensing and temp sensing output to relay or gate

Discussion in 'Third-Party Solutions' started by tobex, Apr 27, 2014.

  1. tobex

    tobex

    Joined:
    Nov 3, 2006
    Messages:
    728
    Likes Received:
    0
    Location:
    Sydney, Australia
    I am planning to add non-intrusive current sensor to induction cooktop power supply to offer logic.

    For example, If sensor associated with power consumption reaches a detection level, then activate loads associated with exhaust fan and cooking lights.

    Similarly, was also interested in doing the same for gas cooktop by adding thermal sensor in exhaust fan. Though I havent resolved how to maintain detection when high air-flow cools sensor. May need to consider CO2.

    How do I configure the "bus coupler" modules 5104DTSI or 5104BCL to achieve a very small form factor ? How do I use 5100CT80 in the way I have described (and why does it cost so much) ?
     
    Last edited by a moderator: Apr 27, 2014
    tobex, Apr 27, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.