Ctouch rs232 control or ir

Discussion in 'General Discussion' started by conor1, Apr 5, 2012.

  1. conor1

    conor1

    Joined:
    Feb 13, 2007
    Messages:
    135
    Likes Received:
    0
    Location:
    Northern Ireland
    hi ,
    i am looking at controlling a third party multiroom controller via ctouch with logic ,i have rs232 codes from multiroom controller manufacturer and basically i need to turn each zone on/off call for source and volume up and down ,i will be controlling source equipment via nirt . could any one point me in the right direction with regards of programming this into the touch screen or if if it would be easier to control everything via IR through the nirt .
    thanks in advance .

    conor
     
    conor1, Apr 5, 2012
    #1
  2. conor1

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    There is a topic in the logic help file about controlling serial devices from logic.
     
    Darren, Apr 6, 2012
    #2
  3. conor1

    conor1

    Joined:
    Feb 13, 2007
    Messages:
    135
    Likes Received:
    0
    Location:
    Northern Ireland
    Thanks
     
    conor1, Apr 12, 2012
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rs232 Control From Xantech

  2. Pronto RFX9600 rs232 control?

  3. Rs232 confusion. press a button sends rs232

  4. CTouch RS232 programming cable pinouts?

  5. To RS232 or not to RS232?

  6. Assign Serial RS232 Logic to a CTouch Software Button?

  7. PACA rs232 vs 5500PC rs232

  8. CTouch Version 2 PS with CTouch Version 3 touch screen

Loading...