Ctouch B&W Mk2 ? Beeping Question..

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by W7-NSW, Apr 2, 2011.

  1. W7-NSW

    W7-NSW

    Joined:
    Mar 22, 2011
    Messages:
    4
    Likes Received:
    0
    Location:
    NSW
    Hi,
    I am working on a B&W MK2 unit.

    Can you request the unit to make a beep or mutliable beeps when a schedule has activated?

    The unit has multiable "reminder screens" that pop up. An audible beep would be a way good to alert that a schedule has activated.

    Thanks..
     
    W7-NSW, Apr 2, 2011
    #1
    1. Advertisements

  2. W7-NSW

    tobex

    Joined:
    Nov 3, 2006
    Messages:
    728
    Likes Received:
    0
    Location:
    Sydney, Australia
    That would only lead to someone smashing it with a sledgehammer.
     
    tobex, Apr 2, 2011
    #2
    1. Advertisements

  3. W7-NSW

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    If you have a unit with logic, you can use the "beep" procedure.

    A simple way to do this would be to create a logic module which does a beep, then disables itself. Enable this module from the schedule (using the Module Enable special function) and then you will get a beep.

    If you want more than one beep, just put several beep procedures in the module separated by delays.
     
    Darren, Apr 2, 2011
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.