CTC V3 CALIBRATION

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by magic8, Feb 28, 2023.

  1. magic8

    magic8

    Joined:
    Jan 6, 2009
    Messages:
    96
    Likes Received:
    1
    Have a CTC3 that someone has decided to calibrate it!!!!!
    I cannot access the tools page now to get to the page to recalibrate. When you touch the screen other icons
    do switch but unable to
    access any of the left hand icons.We tried to connect to the screen to download the project again but RJ45 under
    facia not working.With crossover cable connected PC shows no connection.
    Has anyone any ideas?
    Can you download program via cbus?
    Thanks
     
    magic8, Feb 28, 2023
    #1
  2. magic8

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    291
    Likes Received:
    22
    Location:
    Melbourne Victoria
    Hi Magic,
    There are several things you can do.
    The easiest is to create a PICED project with one big calibration button on the startup page, you would need to do this on another screen if available, and then transfer the CF card to the other unit. If your PC has a CF reader you can just plug it in and update their project (Run PICED on the CF card in the PC slot) with a calibrate startup page and then put it back in the unit. CF cards both have to be for CTC3 units not 1 or 2 they are a different size.

    If your still having problems i can provide you with a CF card to calibrate the screen with. Once re-calibrated the settings are saved in NV memory so will stay the same after putting back the original card.
    Or alternatively you can send the unit to me and i can fix the problem here.
    Cost of card would be $30 plus $25 for postage
    If your local to Nunawading Victoria you can bring it in and I'll do it for $30
    Cost for me to do it here would be $85 plus $25 postage


    Regards

    Trevor Callaghan
    Workshop Manager
    C-Bus Repairs


    JEA Technologies Pty Ltd | www.jeatech.com.au
    Unit 36, 41-49 Norcal Road, Nunawading VIC 3131, Australia
    M +61 404 887 463 | T +61 3 8736 0328 | E [email protected]
     
    Trevor, Mar 1, 2023
    #2
  3. magic8

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    291
    Likes Received:
    22
    Location:
    Melbourne Victoria
    Sorry, forgot to say if the unit is connected to a network you use that connection to push the project into it.
     
    Trevor, Mar 1, 2023
    #3
  4. magic8

    magic8

    Joined:
    Jan 6, 2009
    Messages:
    96
    Likes Received:
    1
    Thanks for that
    I have 5 or 6 screens here that have been taken out of cbus projects over the years I will see if I can get one to work
     
    magic8, Mar 1, 2023
    #4
  5. magic8

    magic8

    Joined:
    Jan 6, 2009
    Messages:
    96
    Likes Received:
    1
    Are the cf cards interchangeable between v1/2/3
    Thanks
     
    magic8, Mar 1, 2023
    #5
  6. magic8

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    291
    Likes Received:
    22
    Location:
    Melbourne Victoria
    No worries, I may be interested in buying them from you, what versions are they.
    That is if you no longer need them.
     
    Trevor, Mar 1, 2023
    #6
  7. magic8

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    291
    Likes Received:
    22
    Location:
    Melbourne Victoria
    NO. the CF card for the CTC3 is 1Gb the ones in the CTC1 and 2 are 256Mb and can be swapped no problem but a card for a CTC3 won't work in a CTC1 or CTC2 and visa versa...
     
    Trevor, Mar 1, 2023
    #7
  8. magic8

    magic8

    Joined:
    Jan 6, 2009
    Messages:
    96
    Likes Received:
    1
    Doh!!!!
    I don’t have a spare CTC3
    Will see what I can sort out
     
    magic8, Mar 1, 2023
    #8
  9. magic8

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    291
    Likes Received:
    22
    Location:
    Melbourne Victoria
    Whats your location
     
    Trevor, Mar 1, 2023
    #9
  10. magic8

    magic8

    Joined:
    Jan 6, 2009
    Messages:
    96
    Likes Received:
    1
    Cairns
     
    magic8, Mar 1, 2023
    #10
  11. magic8

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    291
    Likes Received:
    22
    Location:
    Melbourne Victoria
    Yikes...
    To far to pick one up :)
    Get back to me if you have no luck. I know a guy up that way...
     
    Trevor, Mar 1, 2023
    #11
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.