Creating a New C-Bus Application

Discussion in 'C-Bus Toolkit and C-Gate Software' started by ScottJames, Jan 14, 2007.

  1. ScottJames

    ScottJames

    Joined:
    Jul 8, 2006
    Messages:
    8
    Likes Received:
    0
    Location:
    Melbourne
    :confused: Hi Everyone,

    Does anyone know if you can create an application at address 208 (Security).
    I will be using a comfort system and apparently the group addresses 1,2,3,4..... correspond with the inputs 1,2,3,4.....etc. So then on a c-touch you could do things like display if doors were open just by creating a status indicator and setting the group address to the input number on comfort.

    Toolkit will only seem to let me create applications within the lighting range?

    Thanks
     
    ScottJames, Jan 14, 2007
    #1
  2. ScottJames

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    In Toolkit if you select File->Preferences->Compatibility and then set "Allow creation of legacy C-Bus Applications" ON you'll be able to create the Application you need..
     
    Duncan, Jan 14, 2007
    #2
  3. ScottJames

    ScottJames

    Joined:
    Jul 8, 2006
    Messages:
    8
    Likes Received:
    0
    Location:
    Melbourne
    Ahhhhhhh,

    Thanks
     
    ScottJames, Jan 14, 2007
    #3
  4. ScottJames

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,391
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    Please, please, please, DO NOT create a standard lighting application at 208 (Security).

    The Security Application (208) talks security language messages. You are in danger of breaking things if you use it for anything else.

    If you can better explain what you want to achieve it may help us to give you a better solution.
     
    ashleigh, Jan 14, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.