Connecting Wiser to Multiple CNI's

Hey guys,

I have two din mount CNI's for two different networks both connecting via ethernet to a switch. The Wiser is connected to the same switch (the inline CNI is not being used) and whilst it connects fine to the network I specify in the project details however when I open the project it says that "that network cannot be controlled".

In toolkit I've set both networks connectivity type to CNI, Wiser and one Wiser and one CNI but no can't connect from PICED. Is what I'm trying to do (connect to two CNI's via the Wiser) possible or do I need to install schedule plus/homegate?

 

This may help explain my situation:

Unit network is 254
Network 253 is selected but can not be controlled.

 

The Wiser can only do 1 direct connection to a C-Bus network. It supports a maximum of 10 networks in total via Network Bridges. As you suspect, you need Schedule Plus or HomeGate to do what you want.

 

Cool thanks, appreciate the response.