Connect to C-Bus on startup --- Options - 'Connect to C-Bus'

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Trevor, May 20, 2026 at 10:10 PM.

  1. Trevor

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    557
    Likes Received:
    46
    Location:
    Melbourne Victoria
    Hi All,
    Is there a way to automatically connect to c-bus when PICED or schedule plus start on can it only be done manually
     
    Trevor, May 20, 2026 at 10:10 PM
    #1
  2. Trevor

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    557
    Likes Received:
    46
    Location:
    Melbourne Victoria
    Oops, forgot to add,
    I can do this using the command line option -Connect at startup
    I need to know if it can be done after that at any time.

    My problem is that if it connects during rebooting it can't see my connection to the cbus interface over my network cable to the Raspberry Pi 4 I use for Cbus interfacing the PC to cbus. It will work ok if I connect to cbus after the computer has completed booting and setup the networks, i can then use connect to c-bus manually and it works ok, I'd like to have this automated if possible
     
    Trevor, May 20, 2026 at 10:14 PM
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.