Comfort Alarm System with C-Touch

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by slychiu, May 17, 2011.

  1. slychiu

    slychiu

    Joined:
    Oct 26, 2004
    Messages:
    34
    Likes Received:
    0
    Location:
    Singapore
    Comfort was the first security system to implement the C-Bus Security Application quite comprehensively.
    This means that a C-Touch can be programmed to show a virtual keypad where the security system can be armed or disarmed using the user codes on the security system, the real time state of security zones like doors and windows can be seen and alarm and trouble conditions can be displayed.
    A screenshot is shown
    [​IMG]

    More screenshots and description can be found on the Comfort Forums at http://www.comfortforums.com/forum11/2262.html

    Disclosure: the author of this post is from Cytech, the manufacturer of Comfort
     
    Last edited by a moderator: May 17, 2011
    slychiu, May 17, 2011
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Alternative Ness alarm system?

  2. UPS on CBUS with Comfort

  3. Comfort Security System

  4. Wiser with Color touch screen and Door Entry System

  5. PAC killing C-Bus communications with Comfort UCM

  6. Cbus intergration with Bosch Solution 64 Alarm System

  7. best way to control an alarm via a spectrum touch scree(with logic)

  8. Ness Dx16 Alarm System

Loading...