Colour Touch screen 5000CTC series

Discussion in 'C-Bus Wired Hardware' started by hugert1, Mar 30, 2016.

  1. hugert1

    hugert1

    Joined:
    Nov 20, 2015
    Messages:
    7
    Likes Received:
    0
    Location:
    cape town
    Question . On one of our installs that has been running for about 4 years has now developed a bug .the colour touch screen that is running the logic on the bus gets frozen , hangs itself . a power cycle gets it to reboot and starts working again for a day or two and gets hung up again .

    what can i do to resolve this issue ?
    is there anything i can do to resolve this issue ?

    any advice would be greatly appreciated
     
    hugert1, Mar 30, 2016
    #1
  2. hugert1

    Conformist

    Joined:
    Aug 4, 2004
    Messages:
    756
    Likes Received:
    66
    Location:
    Adelaide, South Australia
    Are you running any logic on the screen that may (now) be causing it to hang? Trying to eliminate any possible issues...
     
    Conformist, Apr 1, 2016
    #2
  3. hugert1

    hugert1

    Joined:
    Nov 20, 2015
    Messages:
    7
    Likes Received:
    0
    Location:
    cape town
    hung screen

    Yes there is logic running on the screen , it has been running on the screen from the day we installed it . the only function of the logic is to turn lights on in the bathrooms and passages at night if the motion sensor detects movement .
    we have not changed anything on the screen since installation .it has been running the same project and firmware .
     
    hugert1, Apr 4, 2016
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.