CNI not accessible help

Discussion in 'General Discussion' started by DTELEC, Aug 21, 2025.

  1. DTELEC

    DTELEC

    Joined:
    Aug 13, 2025
    Messages:
    2
    Likes Received:
    0
    Location:
    Aus
    I am trying to connecting into the CNI2 for a site I am working on.

    When scanning the cbus network I am able to see the CNI as shown in the photo BUT it is greyed out and says not accessible.

    I can ping the CNI and I am on the same network.
     

    Attached Files:

    DTELEC, Aug 21, 2025
    #1
  2. DTELEC

    L-Byrom

    Joined:
    Mar 9, 2021
    Messages:
    11
    Likes Received:
    0
    Hi there,

    I had the same issue, power cycled the network interface and now working fine.
    Hope this helps you
     
    L-Byrom, Apr 26, 2026
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Regulating free accessible c-bus software on the net

  2. CNI problems - need some help

  3. CNI - Really need help

  4. CNI 5500 module vs Wiser CNI

  5. CNI to CNI Communications

  6. 5500CN2 Device Not Accessible, but found on network, help to connect to edit project file

  7. WITS END - HELP NEEDED - UNITS NOT FOUND AND/OR NOT RESPONDING

  8. attempt to open a network via a cni, but the cni cannot be accessed

Loading...