CBus wired network with Wireless Plug Adaptor

Discussion in 'C-Bus Wireless Hardware' started by Nolram, Feb 13, 2019.

  1. Nolram

    Nolram

    Joined:
    Feb 13, 2019
    Messages:
    2
    Likes Received:
    0
    Hi.
    I have a CBus wired network installed in the house.
    I have one outlet that I cannot hard-wire so have a CBus wireless adaptor that I want to utilise to add that outlet into my eDLT switches/panels.
    My Cbus eDLT switches do not have 'Learn mode'.
    How do I connect my wireless plug adaptor to my wired network so that I can control that outlet via my eDLT switches?
    Any thoughts appreciated.
    Thanks.
     
    Nolram, Feb 13, 2019
    #1
    1. Advertisements

  2. Nolram

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    867
    Likes Received:
    50
    Location:
    Adelaide, Australia
    To use a wireless plug adapter you will need a cbus wireless gateway to create a separate wireless network. The gateway can only be setup using toolkit. You can download toolkit for free, but you will need a cbus serial or network interface (or wiser or shac that come with one).
     
    Ashley, Feb 13, 2019
    #2
    Nolram likes this.
    1. Advertisements

  3. Nolram

    Nolram

    Joined:
    Feb 13, 2019
    Messages:
    2
    Likes Received:
    0
    Thanks Ashley...ouch...that's one expensive way to control one outlet. May return the adaptor and look at alternate solutions to control that outdoor light. Cheers
     
    Nolram, Feb 13, 2019
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.