Cbus units being picked up in S+ from another network.

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by bushy, Jun 8, 2021.

  1. bushy


    May 17, 2008
    Likes Received:
    Hi All,

    We recently had 2 networks which were connected via a bridge which we removed to have 2 individual networks from CNI.
    In toolkit it scans nicely but if you look in S+ under view network states it shows that units that were in one network are showing under the other. Also the bridge comes up which has been removed from the system. Have tried shutting down and all the normal procedures with no luck.

    Clipsal tech support have suggested I check the cubes relay inbuild power supplies but I cannot see how that would remove seeing a unit that no longer exists.

    Any help would be appreciated.
    bushy, Jun 8, 2021
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.