CBUS unit still appears after deletion

Discussion in 'General Discussion' started by bushy, Sep 5, 2024.

  1. bushy

    bushy

    Joined:
    May 17, 2008
    Messages:
    9
    Likes Received:
    0
    Hi All

    We have removed a cbus relay unit and it keeps reappearing randomly when we scan the network. Is this a hangover in CGate?

    Any help would be appreciated
     
    bushy, Sep 5, 2024
    #1
  2. bushy

    oracle

    Joined:
    Jan 18, 2010
    Messages:
    80
    Likes Received:
    2
    Location:
    NSW
    more info needed - if it appears in the network section you removed the wrong one. or its still physically connected to the network
     
    oracle, Sep 9, 2024
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. I'm still finding Originating Unit randomness

  2. 5504GI still playing up

  3. C-Gate <-> PICED loses status after reconnect after 2hr timeout

  4. Linked smoke detectors but still own dry contacts per detector

  5. Wiser firmware - dead unit after less than 24hrs.

  6. logic module scan frequency appears to vary from 5Hz

  7. I just replace a 5500NB but it still won't connect to the CBUS

  8. CBUS still popular / good for residential in 2020 ?

Loading...