Cbus touch

Discussion in 'General Discussion' started by Hek Brettman, Sep 21, 2014.

  1. Hek Brettman

    Hek Brettman

    Joined:
    Sep 21, 2014
    Messages:
    1
    Likes Received:
    0
    Location:
    AUSTRALIA
    I have just added some additional lights to another system that wasn't mine.
    The existing system is ran by a black and white touchscreen.
    The new lights I have put in are connected to 2 separate cbus relays, as they are are at opposite ends of the cbus system, I would to be able to program them to come on with another set of existing lights in the system, and then turn off half an hour after the other lights turn off.
    I would also like a manual off on button on the touchscreen.

    Can anyone help me with some basic instructions, I can use toolkit no worries, and although I have PICED I have never worked with a touchscreen.

    Thanks
     
    Hek Brettman, Sep 21, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Touch Firmware Update? Version 2 C-Touch

  2. C-Touch not responding to touch input

  3. Control Scene on C-Touch A, From C-Touch B?

  4. CBus Touch Screen Questions

  5. AMX and cbus use together,can cbus feeback to AMX?

  6. Don`t manage to connect the colour c touch to the Cbus network?

  7. new to cbus- help chabnging cbus clock on PAC- 12 hrs outof sync

  8. Using Acer Tablet + cbus network interface in place of touch Screen ?

Loading...