CBus light switch no longer turns off light

Discussion in 'General Discussion' started by SPS, Jul 1, 2014.

  1. SPS

    SPS

    Joined:
    Jul 1, 2014
    Messages:
    1
    Likes Received:
    0
    Location:
    Sydney
    Hi, hoping someone may be able to help. Went to turn off a cbus light switch last night and the light no longer goes off. The fan, on the same switch plate works fine. Have tried a new switch, but doesn't work. I gather this may have something to do with programming?

    Just wondering if anyone else has had same problem and if so, how it was resolved.
     
    SPS, Jul 1, 2014
    #1
  2. SPS

    Conformist

    Joined:
    Aug 4, 2004
    Messages:
    756
    Likes Received:
    66
    Location:
    Adelaide, South Australia
    It could be anything but most likely, you have learn enabled and the group address has changed on either the switch or dimmer/relay.

    You (or the installer?) will need to check the group address on the switch matches that of the dimmer/relay channel
     
    Conformist, Jul 2, 2014
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. When a PAC turns on does it get the time before logic starts.

  2. PACA upload turns outputs off

  3. PIR Sensor turns off when light turns off

  4. Off ventilation in 5 minutes after light off

  5. One relay in an install occasionally turns all on

  6. Wiser can no longer talk to CBUS Network

  7. Copy Switch Program to Different Switch

  8. Schedule vs Switch Input - Switch is winning!

Loading...