CBIT Ren number

Discussion in 'Telephone Interface (CBTI) and TICA' started by Charlie Crackle, Jun 4, 2007.

  1. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    The manual Says the CBIT is REN 1.0

    the Sticker on the back of the CBIT says 0.5 which is correct ?

    Charles
     
    Charlie Crackle, Jun 4, 2007
    #1
  2. Charlie Crackle

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    Answered my own question the sticker on the back is the RN number not REN number. Do these mean the same thing ??
     
    Charlie Crackle, Jun 4, 2007
    #2
  3. Charlie Crackle

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,392
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    The LAW says that a REN must be quoted as an integer (1, 2, 3 etc).

    The ACTUAL REN of the CBTI is approx 0.1 but the LAW says we must therefore quote it as 1.0.

    Go figure on the wisdom of the law.
     
    ashleigh, Jun 5, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Can not add the CNI 5500CN by catalogue number.

  2. Catalogue Number Field too Small

  3. Catalogue Number Disapears When Transfering Unit to DB

  4. NSW "C BUS " number plates for sale

  5. Serial Number Matching - NOT

  6. Maximum number of System I/O variables

Loading...