C-Touch - with no touch

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by spi280, Feb 20, 2026 at 10:47 PM.

  1. spi280

    spi280

    Joined:
    Sep 30, 2024
    Messages:
    4
    Likes Received:
    0
    Location:
    Sydney
    in my cbus setup i have a c-touch spectrum colour (with logic engine and firmware 5.4) that isnt responding to touch - it is on and found in toolkit, but when i press the screen nothing happens.

    Is the digitiser dead? What can i do to check. I've disconnected from cbus and rebooted it. Still nothing.

    What are reasonable replacement options - i also have a Wiser2 (with the terrible updated firmware that stopped external access)
     
    spi280, Feb 20, 2026 at 10:47 PM
    #1
  2. spi280

    Trevor

    Joined:
    Nov 22, 2018
    Messages:
    526
    Likes Received:
    46
    Location:
    Melbourne Victoria
    I can help with the spectrum unit. We have replacement touch overlays available. Contact me at the details below.


    JEA Technologies
    Unit 3 36 Koornang Road
    Scoresby Victoria 3179
    Attention to
    Trevor Callaghan
    [email protected]
    0404 887 463
     
    Trevor, Feb 20, 2026 at 10:49 PM
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Touch Firmware Update? Version 2 C-Touch

  2. C-Touch not responding to touch input

  3. Control Scene on C-Touch A, From C-Touch B?

  4. Long Touch - B&W Touch Screen Mk II

  5. C Touch poor touch response

  6. Touch failure in MarkII touch screen

  7. Upgrading from C-Touch to C-Touch MkII

  8. wanted - C-Touch Colour Touch Screen 50xOCTC3

Loading...