C-Touch and HomeGate

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by AllControl, Aug 15, 2004.

  1. AllControl

    AllControl

    Joined:
    Aug 7, 2004
    Messages:
    5
    Likes Received:
    0
    Location:
    C?rdoba, Argentina
    We would like to know if it is possible to do security scenes (fire - CCTV - intrusion - burglary -access control) using the C-Touch.

    We do not have a HomeGate demo software. Is it possible to have it?
     
    AllControl, Aug 15, 2004
    #1
  2. AllControl

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    What do you mean by a "Security Scene" ?

    A scene can control any group addresses. If a group address has been set up to control some aspect of a security panel, then a scene can control security.
     
    Darren, Aug 16, 2004
    #2
  3. AllControl

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Darren, Aug 16, 2004
    #3
  4. AllControl

    Rolecgroup

    Joined:
    Aug 3, 2004
    Messages:
    69
    Likes Received:
    0
    Rolecgroup, Aug 17, 2004
    #4
  5. AllControl

    Rossco

    Joined:
    Aug 15, 2004
    Messages:
    61
    Likes Received:
    0
    Location:
    Victoria
    For total security control you can interface C-BUS to the Inner Range concept 4000 panel via the panels uart port, this give you 2 way comms to control Area's, Door/Gates, user access control, auxilary control and GSM control etc.
    It works very well we use the panel on nearly every C-BUS installation we install.
     
    Rossco, Aug 18, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.