C-Gate server and Macromedia Flash

Discussion in 'C-Bus Toolkit and C-Gate Software' started by parrus, Nov 23, 2006.

  1. parrus

    parrus

    Joined:
    Nov 23, 2006
    Messages:
    3
    Likes Received:
    0
    Hello all!!
    I want to use as the client for C-gate server - Macromedia Flash Player, but it is impossible to receive the response from C-gate server.
    Connection occurs normally, but the answer from a server I to receive it is impossible.
    Maybe problem in config of C-gate server?
    Prompt ме. :confused:

    I use C-Gate v2.5.23 and Macromedia Flash MX 2004.
     

    Attached Files:

    parrus, Nov 23, 2006
    #1
  2. parrus

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    Is the flash client on the same machine as C-Gate? I not you will need to configure access.txt (search these forums for good info + look in the C-Gate Manual).

    Do you have any problems using Telnet to access C-Gate?

    I have no experience with Flash so can't really offer any further suggestions.
     
    Richo, Nov 23, 2006
    #2
  3. parrus

    parrus

    Joined:
    Nov 23, 2006
    Messages:
    3
    Likes Received:
    0
    The flash client and a C-gate server are by one machine.
    The telnet works normally.
    Connection passes without problems, commands are sent and carried out on C-gate servere,the flash client cannot receive the answer from C-gate.
     
    parrus, Nov 23, 2006
    #3
  4. parrus

    parrus

    Joined:
    Nov 23, 2006
    Messages:
    3
    Likes Received:
    0
    Event OnData in Flash client expects in the answer of a server zero byte /0 at the end of the message differently to work with the come data it is impossible.
    Question: possible in C-Gate to add zero bats at the end of the answer?
     
    parrus, Nov 24, 2006
    #4
  5. parrus

    xxj

    Joined:
    Sep 12, 2006
    Messages:
    10
    Likes Received:
    0
    I just know you can get the feedback from port 20025 of telnet.
    Have you tried it?
     
    Last edited by a moderator: Dec 7, 2006
    xxj, Dec 7, 2006
    #5
  6. parrus

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    A bit late (I must have missed your post) , but it is not possible to get C-Gate to append a "zero byte" to its responses.
     
    Richo, Dec 7, 2006
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.