C-Gate doesn't find COM port

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Thomas, May 19, 2005.

  1. Thomas

    Thomas

    Joined:
    Nov 25, 2004
    Messages:
    252
    Likes Received:
    0
    I have been using Schedule Plus 2.0 some time ago, but recently C-Gate will not connect. (see Command window) I assume it is since Toolkit is installed, but am not sure, as I use Schedule Plus very seldom. I also had Schedule Plus 2.5 running, but that too can't be used any more. Also returning to Schedule Plus 2.0 does not give any joy.
    Toolkit and Installation V 2.7.7 runs fine.
    Any help will be appreciated.

    Thomas
     
    Last edited by a moderator: Aug 4, 2010
    Thomas, May 19, 2005
    #1
  2. Thomas

    MikeW

    Joined:
    Sep 7, 2004
    Messages:
    11
    Likes Received:
    0
    MikeW, May 19, 2005
    #2
  3. Thomas

    Thomas

    Joined:
    Nov 25, 2004
    Messages:
    252
    Likes Received:
    0
    Hi Mike,

    Thank you for the info. I will do this and let you know how it turned out.

    Regards
    Thomas
     
    Thomas, May 19, 2005
    #3
  4. Thomas

    Thomas

    Joined:
    Nov 25, 2004
    Messages:
    252
    Likes Received:
    0
    Hi Mike,

    Thank you once again, with V 2.6 everything works fine.

    Regards
    Thomas
     
    Thomas, May 20, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lantronix UDS10B Com Port Redirector ?Failed to Connect? Error

  2. Com port detection

  3. Toolkit com port

  4. Toolkit and Com port

  5. Serial/Com port conflict

  6. New Clipsal USB COM Port Driver version 5.4

  7. Wiser & port mapping (port redirect)

  8. Lantronics Com Port Redirector

Loading...