C-Bus. Turn Lights on at a specified %

Discussion in 'General Discussion' started by Geprge, Dec 27, 2022.

  1. Geprge

    Geprge

    Joined:
    Mar 30, 2022
    Messages:
    1
    Likes Received:
    0
    Hi All,

    I have a motion sensor which turns a light on in the hallway. But it turns the light on at 100%. Using the C-Bus Toolkit Software how do I configure it so that the light turns on at 25%.
     
    Geprge, Dec 27, 2022
    #1
  2. Geprge

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    On the functions tab under MD (movement in dark) change Short Press from On Key to Recall 1. Then on the blocks tab, find the line associated with MD and change preset 1 value to the required percentage. When you OK it, it will prompt that you are using non-standard functions. Just click OK.
     
    Ashley, Dec 28, 2022
    #2
    edmondschan likes this.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How can I turn all lights off?

  2. CGate Error 105001 "Cancelled connection to specified server"

  3. Lights turn on without warning

  4. Novice question - easiest way to turn on lights by schedule?

  5. Novice question - easiest way to turn on lights by schedule?

  6. Not all Dali lights turn on every time with cbus but do with dali programmer

  7. Not all Dali lights turn on every time with cbus but do with dali programmer

  8. C-Bus and HomeKit.... Siri turn on my lights!

Loading...