C-Bus Relay light indicator

Discussion in 'C-Bus Wired Hardware' started by aisya, Mar 18, 2018.

  1. aisya

    aisya

    Joined:
    Dec 11, 2017
    Messages:
    11
    Likes Received:
    0
    hi, I have problem where when I plug in CAT5 cable onto my C-bus Relay L5512RVF, all the relay turn on. every channel lights up. Is it normal or anything i can do about it. please help me.
     
    aisya, Mar 18, 2018
    #1
  2. aisya

    jboer

    Joined:
    Apr 27, 2012
    Messages:
    458
    Likes Received:
    35
    Location:
    Sydney
    Hi Aisya, My first guess is that you have a fault with your cable and there is a short causing the unit to go into ON override. It could also be a problem with the unit.

    I would check your cable first and make sure it is correct, also that it isn't a crossover cable and you are plugging it into a C-Bus system and not an Ethernet system.

    The install manual for that relay is here: http://updates.clipsal.com/clipsalonline/Files/Brochures/W0000486.pdf

    Have a look at pages 5+6 regarding the force on/off features. (using the brown wires, or pins 7 + 8)
     
    jboer, Mar 18, 2018
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.