C-Bus Integration with Integriti BMS via RS232

Discussion in 'General Discussion' started by SolarisM, Nov 11, 2023.

  1. SolarisM

    SolarisM

    Joined:
    Nov 11, 2023
    Messages:
    2
    Likes Received:
    0
    Location:
    Melbourne, Vic
    Hi there,

    I'd like to verify how configuration of comms tasks with c-bus is achieved via a Uart RS232. I have an Integriti SC and have connected the Uart 1 comms port (channel 2) to the C-Bus RS232 D9 port. Having created a BMS comms task with connectivity configured for the RS232. Aside from creating the Automation Task that maps the C-Bus group to an Integriti mapped entity, is there anything else to configure?

    Also, if there is any easy way to monitor potential comms in Toolkit/Piced?

    Thank you in advance!
     
    SolarisM, Nov 11, 2023
    #1
  2. SolarisM

    SolarisM

    Joined:
    Nov 11, 2023
    Messages:
    2
    Likes Received:
    0
    Location:
    Melbourne, Vic
    Further info: the C-Bus RS232 firmware is 4.6.00, error received is "Error: Communication timeout".

    Communication via TCP works perfectly however this would require a second 5500CN2 as the first is being used by a Homebridge via CGate. Hence the preference for RS232.

    Comm Unibus Uart 1 (2): 9600 Baud / 8bits / no parity / 1 stop bit

    Thanks
     
    SolarisM, Nov 12, 2023
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rs232 confusion. press a button sends rs232

  2. Hardware interface between C-Bus & Niagara BMS?

  3. BMS to receive light sensor feedback status via OPC server

  4. To RS232 or not to RS232?

  5. New Inner Range "Integriti" system being rolled out now.

  6. PACA rs232 vs 5500PC rs232

  7. C-BUS BMS INTEGRATION

  8. C-BUS integration with BMS

Loading...