C-Bus ,Daikin(VRV) Integration

Discussion in 'General Discussion' started by Ramesh Babu, Jan 24, 2012.

  1. Ramesh Babu

    Ramesh Babu

    Joined:
    Dec 19, 2011
    Messages:
    11
    Likes Received:
    0
    Location:
    India
    Hi all,

    Can anyone help me out to integrate c-bus and Daikin (VRV) systems.
    we considered BACNet module 5500BACNet Device from Clipsal

    find the below mentioned requirement.

    Switch -DLT

    Key1: Cassate AC On/Off.
    Key2: Temaprature increase/decrease.
    Key3: Fan speed Control increase/decrease.

    for the above requirement what type of function selector I need to select in DLT switch ToolKit software.


    Thanx
     
    Ramesh Babu, Jan 24, 2012
    #1
  2. Ramesh Babu

    DarylMc

    Joined:
    Mar 24, 2006
    Messages:
    1,308
    Likes Received:
    49
    Location:
    Cleveland, QLD, Australia
    Hello Ramesh
    It may be possible to do all that with an add in board from Daikin and some relays or perhaps the BACNet which I am not familiar with but you should at least look at the CoolMaster interface though it will require some logic to run it.
    http://www.xdimax.com/cool/cool.html
    If you search the forum for "CoolMaster" you will find other discussions about it.
     
    DarylMc, Jan 24, 2012
    #2
  3. Ramesh Babu

    brett_lynn

    Joined:
    Sep 4, 2004
    Messages:
    44
    Likes Received:
    0
    Location:
    Beaconsfield Vic
    Send me a PM and ill point you in the right direction
    :)
     
    brett_lynn, Jan 30, 2012
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.