b&w touch screen clock

Discussion in 'General Discussion' started by conor1, Aug 1, 2007.

  1. conor1

    conor1

    Joined:
    Feb 13, 2007
    Messages:
    135
    Likes Received:
    0
    Location:
    Northern Ireland
    hi folks ,
    have been having diffs trying to keep clock on screen after loading program onto screen any ideas ,also screen reverts back to clipsal screen even after setting page as tab 5 .
    cheers conor
     
    conor1, Aug 1, 2007
    #1
  2. conor1

    Jesmond

    Joined:
    May 18, 2005
    Messages:
    107
    Likes Received:
    0
    Location:
    Victoria
    Hey Conor 1,

    Not sure about the clock problem, can you provide more details. In respect to the screen reverting back, have you checked your time out settings on the project details screen ?
     
    Jesmond, Aug 2, 2007
    #2
  3. conor1

    conor1

    Joined:
    Feb 13, 2007
    Messages:
    135
    Likes Received:
    0
    Location:
    Northern Ireland
    hi thanks for reply ,
    have time out set properly i think ,screen reverts back to clipsal page but when you touch screen it goes to proper page .
    regards conor.
     
    conor1, Aug 2, 2007
    #3
  4. conor1

    Wes

    Joined:
    Aug 3, 2004
    Messages:
    8
    Likes Received:
    0
    Time out page

    Hi Conor, sounds like you havn't set the Dark Time out page or the Start up page. These are set on the same page as the Time Out Page settings in the project details.
    Is the clock placed on every page or just the time out page?
     
    Wes, Aug 2, 2007
    #4
  5. conor1

    conor1

    Joined:
    Feb 13, 2007
    Messages:
    135
    Likes Received:
    0
    Location:
    Northern Ireland
    hi its placed on every page thanks
    conor
     
    conor1, Aug 3, 2007
    #5
  6. conor1

    conor1

    Joined:
    Feb 13, 2007
    Messages:
    135
    Likes Received:
    0
    Location:
    Northern Ireland
    page settings our fine now
    cheers conor
     
    conor1, Aug 3, 2007
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Malfunctioning of C-bus 2 channel digital clock

  2. Working Out which unit is the "Clock Gen Active"

  3. which is the best device for the clock.....

  4. How can I stop Minder being the clock Source ?

  5. C-Bus B&W Touch Screen as 3rd party screen

  6. Long Touch - B&W Touch Screen Mk II

  7. Touch Screen error on blue Screen - Not loading the OS & C-Gate

  8. Touch failure in MarkII touch screen

Loading...