Average LUX level calculating.

Discussion in 'General Discussion' started by Beaker, Oct 23, 2008.

  1. Beaker

    Beaker

    Joined:
    Jun 27, 2008
    Messages:
    1
    Likes Received:
    0
    Location:
    Nashville Tennessee
    I would like to take the lux level of three different muli sensors then average them together. This new averaged lux level would control multiple channels of a 1-10 volt output. This is for a commerical application using 0-10 volt dimmable ballasts. There is a PACA on site and I need help writing the code for this application. Can it be done?
     
    Beaker, Oct 23, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus : Calculating Network Voltages

  2. Calculating network items & values

  3. Average Home, Design & Programming Time?

  4. Multi-sensor as Lux sensor

  5. Sunset Function on SENPILL and Light Level of 77 LUX goes 0 when Occupancy Enabled

  6. SENLL lux level

  7. Lux Level Switching

  8. Calculating maximum cable runs, cable topologies, etc

Loading...