Air Conditioning Application and Thermostats

Discussion in 'C-Bus Wired Hardware' started by MHeaton, May 5, 2018.

  1. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    104
    Likes Received:
    1
    Location:
    London
    Hi there,
    According to the Air Conditioning specification there are three enable groups (or lighting groups) defined that provide the Schedule Enable, Schedule Disable and Schedule Override commands to slaves of the thermostat.

    In the Thermostat (PC_TSB) I can see configuration for Remote Setback Enable and Disable but cannot see where I can set the schedule control groups - can I? Are these mapping two of the above or are they different?

    Thanks
    Mark
     
    MHeaton, May 5, 2018
    #1
  2. MHeaton

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,524
    Likes Received:
    173
    Location:
    Adelaide, Australia
    PC_TSB is a single zone thermostat and doesn't support scheduling. You need the 4 zone programmable thermostat for that. Then you will see a scheduling tab.
     
    Ashley, May 5, 2018
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Air conditioning zone control

  2. C-Bus and Air Conditioning

  3. Air Conditioning Integration

  4. 08-001-1 C-Gate Air Conditioning Application User Guide

  5. Air Conditioning Dampers

  6. Air Conditioning Power Control

  7. Air Conditioning System

  8. Access to Air Condition Application

Loading...