Advanced Project 1 - Camera Control

Discussion in 'Pascal Logic Code Examples' started by coppo, Sep 25, 2006.

Thread Status:
Not open for further replies.
  1. coppo

    coppo

    Joined:
    Sep 7, 2004
    Messages:
    221
    Likes Received:
    10
    Location:
    Adelaide
    Application:
    Controlling a motorised security camera using RS-232 from a Colour C-Touch.

    Method:
    • Used the camera with its normal controller and viewed the data strings that
    • the Dynavision controller box sends.
    • The commands sent were viewed by using a program similar to hyperterminal.
    • The commands were then replicated using logic programming in the colour C-Touch touchscreen.


    Requirements
    PICED software V3.7 or later.
    Colour C-Touch touchscreen
     

    Attached Files:

    coppo, Sep 25, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. IP Camera

  2. displaying of ip camera on colour ctouch

  3. Advanced features on CTouch (Mono) required

  4. Advanced CBus applications

  5. Advanced notice- Major software update

  6. Today's Head Scratcher - Pan/Tilt IP Camera Control

  7. Getting more advanced on my setup

Loading...
Thread Status:
Not open for further replies.