A quick logic question

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by mikegriff, Oct 27, 2008.

  1. mikegriff

    mikegriff

    Joined:
    Aug 3, 2004
    Messages:
    153
    Likes Received:
    3
    Location:
    Wales
    I would like to try and add some logic based on my alarm system
    Using System IO on my normal component properties
    I can click on In-built and then select Securitry Zone Status
    I think you can all see where I'm going to!

    How do I use Securitry Zone Status - or even get to this value using logic

    Just a quick pointer / example should get me going

    Thanks in advance
    Mike
     
    mikegriff, Oct 27, 2008
    #1
  2. mikegriff

    Mark

    Joined:
    Oct 28, 2004
    Messages:
    196
    Likes Received:
    1
    Location:
    Grenoble, France
    GetIntIBSystemIO

    Hiya,

    You'll need: GetIntIBSystemIO("Security Zone Status", _Zone_Number_)

    Its also accessible off the right click menu in Logic via: System IO | Get Int IB System IO

    Cheers,
    Mark.
     
    Mark, Oct 28, 2008
    #2
  3. mikegriff

    jory

    Joined:
    Aug 3, 2004
    Messages:
    2
    Likes Received:
    0
    How do you write the code to use the status from this internal IO for the zone status

    Regards
    Glenn
     
    jory, Oct 28, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. quick program

  2. Quick Toggle in Toolkit 1.1.4

  3. C-Bus : Wireless Quick Start Guide

  4. quick PAC question

  5. Quick question re CGATE licensing...

  6. Quick Start Learn Mode on Dimmers & Relays

  7. CBus Serial Interface Quick Start Guide

  8. Quick check of lights ON

Loading...