5753L sensor not working ? Do I need reprogram after swap?

Discussion in 'General Discussion' started by Joshcai81, Feb 16, 2024.

  1. Joshcai81

    Joshcai81

    Joined:
    Feb 16, 2024
    Messages:
    1
    Likes Received:
    0
    Location:
    Brisbane
    Hi every one I am new to the cubs2 system , accidentally push masters on button turn on all the light at house, and after back load all the file back to the system find out entry sensor no longer working, DiD scan with c bus tool kit on the system it shows the sensor is in working condition, does that means sensor itself died? If I swap the new sensor with existing one do I just do straight swap without reprogramming it? Please help many thanks.
     
    Joshcai81, Feb 16, 2024
    #1
  2. Joshcai81

    Graham Lamb

    Joined:
    Aug 3, 2004
    Messages:
    95
    Likes Received:
    12
    Location:
    Sydney, Australia
    You will need to program the new unit to be the same as old unit with tookit
     
    Graham Lamb, Feb 18, 2024
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. multi sensor working oK Not really :(

  2. Pir Sensor 5753l

  3. C-Bus Testing and Brightgreen lighting swap

  4. NIB USB Interface to swap for PSU

  5. CBUS Switches Not Working After Power Outage

  6. eDLT not going back on after proximity sensor switches off

  7. C-bus pad/wiring not working after power cut

  8. All light switches not working. Need a technician in Eastern Melbourne

Loading...