5753L PIR indicator LED wont come on

Discussion in 'C-Bus Wired Hardware' started by mcsortan, Mar 25, 2014.

  1. mcsortan

    mcsortan

    Joined:
    Mar 16, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    adelaide
    I have a strange problem whereby the LED on my 360 deg indoor PIR no longer comes on when it detects movement.

    The PIR still works OK, but no LED and I cant for the life of me work out why.

    Any ideas would be great
     
    mcsortan, Mar 25, 2014
    #1
  2. mcsortan

    Robbo_VIC

    Joined:
    Jan 24, 2011
    Messages:
    142
    Likes Received:
    0
    Location:
    Melbourne, VIC
    Have you checked under the Blocks tab in the unit programming to ensure the LED Assignment is ticked for the appropriate Group Address?
     
    Robbo_VIC, Mar 26, 2014
    #2
  3. mcsortan

    mcsortan

    Joined:
    Mar 16, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    adelaide
    thansk for the reply

    yep, allocation of LED indicator is correct.
    I've even tried resetting the unit - disconnecting it physically etc.

    not sure whether it is possible to do a firmware reload, but something has gone wrong with it

    ive now swapped it out for another unit that works fine - so there is definitely something 'phsically' wrong with this PIR
     
    mcsortan, Mar 27, 2014
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.