5500PC looses connection

Discussion in 'General Discussion' started by nickrusanov, Sep 6, 2010.

  1. nickrusanov

    nickrusanov

    Joined:
    Aug 5, 2004
    Messages:
    308
    Likes Received:
    0
    Location:
    russia
    Our installer asks if it is normal:

    AMX with C-Bus works using Open Protocols and 5500PC. But when power down occurs, it does not restore the connection. What helps - is to open PC interface using C-Bus Toolkit and after that connect to AMX again.

    Anything could be done here?
    thank you
     
    nickrusanov, Sep 6, 2010
    #1
  2. nickrusanov

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    Sounds like the AMX isnt setting up the pci in the correct mode.
     
    constantcharge, Sep 6, 2010
    #2
  3. nickrusanov

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,402
    Likes Received:
    28
    Location:
    Adelaide, South Australia
    Yep. The AMX driver is not setting up the "listen for power up" message from the PCI.

    And it is not initialising the PCI properly either.
     
    ashleigh, Sep 6, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Any alternative to using a 5500PC

  2. How to connect 5500PC PCI to your com and to the network(C-bus 2 or ToolKit)?

  3. Interfacing the PC to the 5500PC problem

  4. 5500PC is now a PC_INT_1 ?

  5. Questions about 5500PC

  6. how to connect 5500PC to computer vir computer network

  7. Unable to connect to 5500pc

  8. CNI connection issues - "connection already in use"

Loading...