5500PACA question

Discussion in 'C-Bus Wired Hardware' started by Burton Electrical, Nov 23, 2016.

  1. Burton Electrical

    Burton Electrical

    Joined:
    Aug 14, 2015
    Messages:
    29
    Likes Received:
    0
    Location:
    Melrose Park
    Hi all,

    Not sure if this is a silly question or not, Is there any difference whatsoever between a 5500PACA pascal controller manufactured and sold into the Australian market versus one made and sold into the square D USA market??


    Thanks for any replies / knowledge
     
    Burton Electrical, Nov 23, 2016
    #1
  2. Burton Electrical

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,391
    Likes Received:
    24
    Location:
    Adelaide, South Australia
    Very likely none.

    PACA has no build in mains power supply, so apart from markings should be the same.

    Things sold into the US market that run off mains power SHOULD NOT be used in other countries due to differences in mains voltage, frequency, ratings, EMC regulations, etc etc.

    But things that run off plug packs should all be the same inside, just cosmetic changes on the outside.
     
    ashleigh, Nov 24, 2016
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.