5031ts

Discussion in 'C-Bus Wired Hardware' started by CJL, Jan 17, 2016.

  1. CJL

    CJL

    Joined:
    Mar 31, 2006
    Messages:
    15
    Likes Received:
    0
    Location:
    Warwick UK
    Hello,

    I've just been supplied this sensor which is showing the temperature on a MK2 screen via a monitor component. I can also see the state of the control group change in the log, however, a status indicator on the screen is not reflecting this, and a logic module is not responding to it either.

    Is there something additional I need to do? Has anyone experienced this?
     
    CJL, Jan 17, 2016
    #1
  2. CJL

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    395
    Likes Received:
    37
    Location:
    Adelaide
    Are you comparing the same group address on the same application or are they same GA number on a different application.
    As a default the 5031ts uses the heating application not the lighting application
     
    Wonkey, Jan 18, 2016
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus temperature sensors 5031TS

  2. Reading temperature from 5031TS series sensor

  3. c-bus 5031ts

  4. 5031TS Temperature Sensor problem

  5. Can 5031TS be recalibrated?

  6. 5031ts

  7. 5031TS Temperature sensor - how?!

Loading...