5031PEWP-GY Enable/Disable

Discussion in 'C-Bus Wired Hardware' started by eha002, Nov 20, 2025 at 11:33 PM.

  1. eha002

    eha002

    Joined:
    Jun 29, 2012
    Messages:
    14
    Likes Received:
    0
    Location:
    Alstonville
    If i have a Schedule that enables and disables a Light level sensor,
    If the sensor turns the light is on and is then disabled will it turn the light off, or does it stay on forever (until you manually turn it off)
     
    eha002, Nov 20, 2025 at 11:33 PM
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 06-019-1 Enable & Disable Status After A Power Failure

  2. Outdoor PIR Enable/Disable

  3. PIR enable/disable from PAC

  4. Sensor Enable Disable

  5. PIR Sensor Enable/Disable

  6. Using scenes to enable/disable sensors

  7. pir enable/disable

  8. Disable PIR and switch with scene, then enable again with all off

Loading...