5031PE Light Level Sensor stoped working

Discussion in 'C-Bus Wired Hardware' started by Ian, Feb 13, 2019.

  1. Ian

    Ian Administrator

    Joined:
    Nov 1, 2017
    Messages:
    27
    Likes Received:
    8
    I've got a 5031PE light level sensor mounted outside, which is used to trigger outdoor lamps. However, a few days ago I powered down the C-Bus system to fit some new internal lights.

    Since powering back on, the outdoor lamps are no longer triggered. The problem appears to be related to the 5031PE sensor, as it's always reading 3181 lux/296 ft candle as the light level within Toolkit. I can manually trigger the outdoor lamps, so the dimmer channel + bulbs are ok.

    Is there any chance I can revive/repair the 5031PE, or has it just bitten the dust? I've already powered off/on ;). It's well out of warranty by now.
     
    Last edited: Feb 13, 2019
    Ian, Feb 13, 2019
    #1
  2. Ian

    Ian Administrator

    Joined:
    Nov 1, 2017
    Messages:
    27
    Likes Received:
    8
    All fixed now. I reset the unit and configured it from scratch and it seems to be working :).
     
    Ian, Feb 16, 2019
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.