4 Channel Dimmer Modules

Discussion in 'C-Bus Wired Hardware' started by Stephen Scott, Dec 19, 2020.

  1. Stephen Scott

    Stephen Scott

    Joined:
    Apr 18, 2014
    Messages:
    17
    Likes Received:
    0
    Location:
    Melbourne
    Hi,

    Our 4 channel dimmer modules have been installed for quite a few years and some channels are starting to state "No Power" and have stopped working, there is definitely power on each channel input, I assume the units internal control power links are dying?

    Any one else having the same problems and is there a fix?

    Thanks in advance
    Stephen
     
    Stephen Scott, Dec 19, 2020
    #1
  2. Stephen Scott

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    395
    Likes Received:
    37
    Location:
    Adelaide
    Where are you seeing the state No Power?
     
    Wonkey, Dec 22, 2020
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1A 2A Dimmer modules POWER BOOSTERS

  2. New 8 Channel Dimmer Modules

  3. 06-0011-1 12 Channel Dimmer E11 Error

  4. LED lamps and 4 channel / 8 channel dimmers

  5. Using a two channel relay for single channel ?

  6. 2 dimmer modules behaving strangely at the same time

  7. Eight Channel Dimmer 5508D1A Dead on 1st Generation (Light Blue) Modules System

Loading...