3 networks with Color Touchscreen

Discussion in 'General Discussion' started by tidefan, Sep 30, 2014.

  1. tidefan

    tidefan

    Joined:
    Jan 6, 2009
    Messages:
    45
    Likes Received:
    0
    Location:
    Alabama
    I have 3 networks A,B,C. Networks A and C are both connected to B. Bridges on A and C broadcast to adjacent networks and also to A or C respectively. I have a color touchscreen on network B where all scenes are stored. When I execute a scene from A, not all of the scene groups are being activated from the scene stored in the color touchscreen. Do i have the touchscreen programmed correctly. See screen shot.
     

    Attached Files:

    tidefan, Sep 30, 2014
    #1
  2. tidefan

    tidefan

    Joined:
    Jan 6, 2009
    Messages:
    45
    Likes Received:
    0
    Location:
    Alabama
    Note: All TAGS are the same for all three networks. I have setup to act as one network.
     
    tidefan, Sep 30, 2014
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Color TouchScreen Installation

  2. Problem with C-Touch Color

  3. Color Touchscreen opinions

  4. making color touchscreen into digital photo frame

  5. Wiser with Color touch screen and Door Entry System

  6. Viewing Wiser GUI from Color Touchscreen CTC

  7. Color Touchscreen power supplies

  8. Color c-touch color can read but not send out c-bus messages

Loading...