2 network scenes problem

Discussion in 'C-Bus Toolkit and C-Gate Software' started by liorpeled, Aug 7, 2017.

  1. liorpeled

    liorpeled

    Joined:
    Aug 14, 2016
    Messages:
    13
    Likes Received:
    0
    Location:
    israel
    hello guys,
    I have 2 networks one for the entrance floor and one for the basement.
    is there a way to turn off all the basements lights from a keypad in the entrance floor?
    and i have one paca in the network.
    do i need 2? or 1 will do the job?
     
    liorpeled, Aug 7, 2017
    #1
  2. liorpeled

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,420
    Likes Received:
    62
    Location:
    Adelaide
    The PAC can control groups on any network, so even if it's on the entrance level you can create a scene in it to turn off the groups in the basement level.

    If your PAC is on the entrance level network (same as the keypad), you can simply set up a key on that keypad to trigger the scene.

    If the PAC is on the basement network, you will need to set up the network bridge to forward the application that the key is on so that the scene trigger reaches the PAC (you may need to be careful if the same groups are used for different things on the different networks).

    Nick
     
    NickD, Aug 8, 2017
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.